GUNSMITH
KITS & BLITZPAKS
KIT #1 - STRIKER & FIRING PIN SPRINGS
KIT #1 consists of 50 striker/firing pin springs for 10 popular semiautomatic
pistols listed below. 5 springs for each pistol are provided. These springs
are manufactured from the finest-quality spring wires to essentially original
factory specifications and require no fitting. Springs are ready for immediate
installation and are individually packaged and identified by application.
Stock No. 10010.....$ 24.99 
BLITZPAK #1
Blitzpak #1 consists of a total of 10 striker/firing pin springs, 1
of each spring design as described above in Kit #1. No individual spring
identification is provided.
Stock No. 10015.....$ 9.99
Kit #1/Blitzpak #1 Spring Listing
Beretta VP, 6.35mm Striker Spring
Beretta 1931/1934, 7.65mm Striker Spring
Luger, 7.65 & 9mm Striker Spring
Mauser 1910/1934, 6.35mm Striker Spring
Mauser 1910/1934, 7.65mm Striker Spring
Mauser HSc, 7.65mm Firing Pin Spring
Nambu 1925 (Type 14), 8mm Striker Spring
Ortgies, 6.35mm Striker Spring
Ortgies, 7.65mm/9mm Striker Spring
Walther PP/PPK/PPKS, 7.65mm Firing Pin Spring
KIT #2 - EXTRACTOR SPRINGS
KIT #2 consists of 100 general purpose coil-type extractor springs
for use in semiautomatic pistols. There are 10 spring designs with 10 spring
of each design provided. Both short radial and long axial type springs
are included in this kit. All springs have extra coils to permit fitting.
Stock No. 10020.....$ 24.99
BLITZPAK #2
Blitzpak #2 consists of a total of 20 extractor springs, 2 of each
design as described in Kit #2.
Stock No. 10025.....$ 9.99
KIT #3 - MINIATURE COIL SPRINGS
KIT #3 consists of 150 general purpose miniature coil-type springs.
There are 15 different spring designs with 10 springs of each design supplied.
Springs are designed to function in 1/16" to 1/8" and 1.5mm to 3.5mm inside
diameters. Springs vary from 1/2" to 1-1/2" in overall length. Fitting
of springs is required. This is a highly useful assortment to have on hand.
Stock No. 10030.....$ 29.99
BLITZPAK #3
Blitzpak #3 consists of a total of 30 miniature coil springs, 2 of
each design as described in Kit #3 .
Stock No. 10035.....$ 9.99
KIT #4E - LIGHT-DUTY ENGLISH COIL SPRINGS
KIT #4 English consists of 100 general purpose light-duty coil springs
manufactured to English standards. There are 10 different designs with
10 springs of each design supplied. Springs are designed to function in
3/32" to 1/4" inside diameters and vary in length from 2 to 4 inches overall.
This is a highly versatile selection of light-duty coil springs.
Stock No. 10041.....$ 24.99
BLITZPAK #4E
Blitzpak #4E consists of a total of 20 light-duty English springs,
2 of each design as described in Kit #4E.
Stock No. 10042.....$ 9.99
KIT #4M - LIGHT-DUTY METRIC COIL SPRINGS
KIT #4 Metric consists of 100 general purpose light-duty coil springs
manufactured to metric standards. There are 10 different designs with 10
springs of each supplied. Springs are designed to function in 2.5mm to
7mm inside diameters and vary from 50mm to 100mm in overall length. This
is a highly desirable assortment of springs, especially for repairs in
foreign manufactured arms.
Stock No. 10045.....$ 24.99
BLITZPAK #4M
Blitzpak #4M consists of a total of 20 light-duty metric springs, 2
of each design as described in Kit #4M.
Stock No. 10046.....$ 9.99
KIT #5E - HEAVY-DUTY ENGLISH COIL SPRINGS
KIT #5 English consists of 100 general purpose heavy-duty coil springs
manufactured to English standards. There are 10 different designs with
10 springs of each supplied. Springs are designed to function in 3/32"
to 1/4" inside diameters and vary in length from 2 to 4 inches. This kit
is a must for the gunshop.
Stock No. 10051.....$ 24.99
BLITZPAK #5E
Blitzpak #5E consists of a total of 20 heavy-duty English springs,
2 of each design as described in Kit #5E.
Stock No. 10052.....$ 9.99
KIT #5M - HEAVY-DUTY METRIC COIL SPRINGS
KIT #5 Metric consists of 100 general purpose heavy-duty coil springs
manufactured to metric standards. There are 10 different designs with 10
springs of each supplied. Springs are designed to function in 2.5mm to
7mm inside diameters and vary from 50mm to 100mm in overall length. This
kit offers high-tensile, heavy-duty coil springs required for many foreign
arms repair.
Stock No. 10055.....$ 24.99
BLITZPAK #5M
Blitzpak #5M consists of a total of 20 heavy-duty metric springs, 2
of each design as described in Kit #5M.
Stock No. 10056.....$ 9.99
KIT #345 - MASTER GUNSMITH SPRING KIT
KIT #345 offers a complete selection of Wolff general purpose coil
springs. Included are 1 each of Kit #3, Kit #4-English, Kit #4-Metric,
Kit #5-English and Kit #5-Metric. This kit provides a total of 550 highly
usable general purpose springs for the gunshop and at a savings of more
than 20% over individually purchased kits.
Stock No. 10058.....$ 99.99
BLITZPAK #345
Blitzpak #345 includes 1 each of Blitzpak #3, Blitzpak #4-English,
Blitzpak #4-Metric, Blitzpak #5-English and Blitzpak #5-Metric or a total
of 110 highly useful general purpose springs.
Stock No. 10059.....$ 39.99
KIT #6 - MAGAZINE SPRINGS FOR RIFLES
KIT #6 consists of a total of 10 extra power magazine springs for rifles
with tubular-type magazines. There are 5 different spring sizes with 2
springs of each size supplied; 1) .22 rimfire, 2) .22/.32 rimfire, 3) 25/20,
32/20, etc. 4) 38/40, 30/30, .32 Special, etc., 5) 44/40, 45/70, 45/90
and heavy .45 calibers. Each spring is 40 inches long to permit fitting
to most any magazine. Springs are approximately 20% stronger than original
factory springs for improved feeding.
Stock No. 10061.....$ 24.99
BLITZPAK #6
Blitzpak #6 contains a total of 5 springs, 1 of each size as described
in Kit #6.
Stock No. 10062.....$ 16.99
KIT #6A - SHOTGUN MAGAZINE SPRINGS
KIT #6A consists of a total of 10 extra power magazine springs for
those shotguns with tubular-type magazines. There are 5 different spring
sizes with 2 springs of each size supplied; 1) .410 gauge, 2) 28 gauge,
3) 20 gauge, 4) 16 gauge, 5) 12 gauge. Each spring is 40 inches long to
permit fitting to most any magazine. Springs are approximately 20% stronger
than original factory springs for improved feeding.
Stock No. 10065.....$ 24.99
BLITZPAK #6A
Blitzpak #6A contains a total of 5 springs, 1 of each size as described
in Kit #6A.
Stock No. 10066.....$ 16.99
H&R, IVER JOHNSON NOTE:
Kits #7 through #11 are designed for use in H&R, IVER JOHNSON and
other similar break-open and solid frame revolvers. All springs are made
from high-quality spring steel and all have extra material where required
to permit fitting.
KIT #7 - V-TYPE TRIGGER RETURN SPRINGS
KIT #7 consists of a total of 12 V-type trigger return springs. There
are 6 different spring designs with 2 springs of each design supplied as
illustrated below. Springs require fitting.
Stock No. 10070.....$ 14.99
No. 71
No. 72
No. 73
1/4" wide x .028" 1/4" wide x .030"
5/16" wide x .032"
No. 74
No. 75
No. 76
5/16" wide x .025" 5/16" wide x .035" 5/16"
wide x .035"
BLITZPAK #7
Blitzpak #7 consists of a total of 6 springs, 1 of each spring as described
in Kit #7.
Stock No. 10071.....$ 9.99
KIT #7A - V-TYPE TRIGGER RETURN SPRINGS
FOR SPUR TRIGGER REVOLVERS.
KIT #7A contains a total of 12 V-type spur trigger revolver springs.
There are 3 different spring designs with 4 springs of each design supplied
as illustrated below. Springs require fitting.
Stock No. 10072.....$ 14.99
No. 7A1
No. 7A2
No. 7A3
3/16" wide x .018" 7/32" wide x .018"
1/4" wide x .018"
BLITZPAK #7A
Blitzpak #7 consists of a total of 6 springs, 2 of each spring as described
in Kit #7A.
Stock No. 10073.....$ 9.99
KIT #7B - V-TYPE SEAR SPRINGS
KIT #7B consists of a total of 12 V-type sear springs. There are 2
different spring designs with 6 springs of each design supplied, as illustrated
below. Springs have extra material for fitting.
Stock No. 10074.....$ 14.99
No. 7B1 No. 7B2
3/64" wide x .014" 1/8" width x .015"
BLITZPAK #7B
Blitzpak #7B consists of a total of 6 springs, 3 of each spring as
described in Kit #7B.
Stock No. 10075.....$ 9.99
KIT #7C - CYLINDER HAND SPRINGS
KIT #7C consists of a total of 12 cylinder hand springs. There are
2 spring designs with 6 springs of each design supplied. Springs are intended
for repairs to .32 and .38 caliber revolvers as illustrated below. Springs
require fitting.
Stock No. 10076.....$ 14.99
No. 7C1 No. 7C2
.32 Caliber .38 Caliber
BLITZPAK #7C
Blitzpak #7C consists of a total of 6 springs, 3 of each spring as
described in Kit #7C.
Stock No. 10077.....$ 9.99
KIT #7D - CYLINDER FRICTION SPRINGS
KIT #7D consists of a total of 12 cylinder friction springs. There
is 1 spring design which will accommodate repairs to both .32 and .38 caliber
revolvers. Fitting is required.
Stock No. 10078.....$ 12.99
3/64" width x .014"
BLITZPAK #7D
Blitzpak #7D consists of a total of 6 cylinder friction springs as
described in Kit #7D.
Stock No. 10079.....$ 7.99
KIT #8 - FLAT-TYPE TRIGGER RETURN
SPRINGS
KIT #8 contains a total of 12 flat-type trigger return springs. There
are 3 different spring designs with 4 springs of each design supplied,
as illustrated below. Springs have extra material for fitting.
Stock No. 10080.....$ 14.99
No. 81
5/16" wide x .020"
No. 82
5/16" wide x .025"
No. 83
5/16" wide x .025"
BLITZPAK #8
Blitzpak #8 consists of a total of 6 springs, 2 of each spring as described
in Kit #8.
Stock No. 10085.....$ 9.99
KIT #9 - FLAT-TYPE HAMMER SPRINGS
KIT #9 contains a total of 10 flat-type hammer springs. There are 5
different spring designs with 2 springs of each design supplied, as illustrated
below. Springs have extra material for fitting.
Stock No. 10090.....$ 14.99
#91
7/32" wide x .040"
#92
9/32" wide x .035"
#93
9/32" wide x .035"
#94
9/32" wide x .035"
#95
9/32" wide x .035"
BLITZPAK #9
Blitzpak #9 consists of a total of 5 springs, 1 of each spring as described
in Kit #9.
Stock No. 10095.....$ 9.99
KIT #10 - COIL SPRINGS
Kit #10 consists of a total of 100 general purpose coil springs selected
especially for use with H&R, Iver Johnson and similar type revolvers.
Supplied are 10 different spring designs, 10 of each design. All springs
have extra coils to allow fitting. Springs are intended to function as
barrel latch springs, extractor springs, firing pin springs, and sear springs
among others.
Stock No. 10100.....$ 24.99
BLITZPAK #10
Blitzpak #10 consists of a total of 10 springs, 1 of each spring as
described in Kit #10.
Stock No. 10105.....$ 9.99
KIT #11 - ASSORTMENT KIT
Kit #11 consists of 1 each of kits #7, 7A, 7B, 7C, 7D, 8, 9 and 10.
This kit offers savings of 20% over purchase of the individual Kits.
Stock No. 10110.....$ 99.99
BLITZPAK #11
Blitzpak #11 consists of 1 each of Blitzpaks #7, 7A, 7B, 7C, 7D, 8,
9 and 10. Like the larger kit above, Blitzpak #11 offers savings of more
than 15% over the purchase of individual Blitzpaks.
Stock No. 10115.....$ 64.99
KIT #12 - WIRE-TYPE TOP LEVER SPRINGS
Kit #12 consists of 18 "U" shaped round wire springs (illustrated at
right) for use as top lever springs in many double-barrel shotguns. The
spring wire is 0.098" in diameter which is normally a universal size, is
pre-tempered and requires no heat treating. Springs are of 1 design and
must be shaped and fitted as required.
Stock No. 10120.....$ 14.99
BLITZPAK #12
Blitzpak #12 consists of a total of 9 wire-type top lever springs as
described in Kit #12 above.
Stock No. 10125.....$ 9.99
KIT #13 - SHOTGUN HAMMER SPRINGS
Kit #13 consists of 50 coil-type shotgun hammer springs designed for
general purpose repairs. There are 10 spring designs, 5 of each are supplied.
Springs are made from heavy round section wires and vary from 2 to 4 inches
in length. Sufficient variations and strengths are included to handle most
repairs for automatics, double barrels, pumps, over & unders and single
barrel shotguns. Fitting of springs is required.
Stock No. 10130.....$ 26.99
BLITZPAK #13
Blitzpak #13 consists of a total of 10 springs, 1 of each design as
described in Kit #13 above.
Stock No. 10135.....$ 9.99
KIT #14 - SEMIAUTOMATIC PISTOL RECOIL
SPRINGS
Kit #14 consists of 50 coil springs designed for use in semiautomatic
pistols with under-barrel recoil systems in various calibers. There are
10 spring designs, 5 of each are supplied. Springs vary from 4 to 6 inches
in overall length. The variations in coil diameter, wire size and pitch
differentials can accommodate many repairs in obsolete pistols where parts
are unavailable, as well as many modern pistols. As these springs require
fitting, we recommend installation by a Gunsmith.
Stock No. 10140.....$ 26.99
BLITZPAK #14
Blitzpak #14 consists of a total of 10 springs, 1 of each design as
described in Kit #14 above.
Stock No. 10145.....$ 9.99
KIT #15 - STRAIGHT SPRING WIRES
Kit #15 consists of 180 pieces of straightened hi-tensile, hi-carbon
round section spring wires in 8 inch lengths. This kit provides a near
universal selection of small diameter spring wires necessary for forming
various types of torsion and other small spring-wire forms used in firearms.
18 different wire sizes are provided in this kit as listed below, with
10 pieces of each size supplied. Wires are individually packaged and identified
by size.
Wire diameters (in inches) provided:
.016 .018 .020 .022 .024 .026 .028 .030 . 032
.034 .035 .036 .038 .040 .042 .044 .046 . 048
Stock No. 10150.....$ 24.99
BLITZPAK #15
Blitzpak #15 consists of a total of 36 straight spring wires, 2 of
each size as described in Kit #15 above. Wires are packaged together and
have no individual size identification.
Stock No. 10155.....$ 9.99
[TOP]
Copyright © 1997-2006
W. C. Wolff Company
All rights reserved.
W.
C. Wolff Company online publications are intended for the use of W. C.
Wolff Company customers for the purposes of researching and purchasing
products offered for sale by W. C. Wolff Company. This publication
may not be copied, duplicated, modified or redistributed in whole or part
without the prior written permission of W. C. Wolff Company |
