CAUTIONS and INSTALLATION TEST PROCEDURE

ALWAYS BE CERTAIN THAT YOUR FIREARM IS UNLOADED BEFORE WORKING ON OR CLEANING IT. Immediately after installing any Wolff Gunspring, or any spring, in any type of firearm that imparts power to a hammer(s), striker(s) or firing pin(s), as the case may be, with the firearm UNLOADED and without any trigger contact, actuate the firearm several times in a vigorous manner to make certain that the hammer(s), striker(s) or firing pin(s) are securely retained in the cocked position prior to let-off. Also, actuate the safety to determine that it is working properly. If during these tests, the hammer(s), striker(s), or firing pin(s) should fail or be released without trigger contact, or the safety does not work properly, DO NOT ATTEMPT TO LOAD OR FIRE THE FIREARM until corrective repairs are made. If any doubts ever exist concerning the safe operation of your firearm(s), consult your local Gunsmith. The above procedure also applies where recoil, bolt or action springs have been installed as well as with any spring replacement.

NOTE: Always wear high-quality safety eyeglasses when installing or fitting Wolff Gunsprings, or any springs, to prevent eye injury. High-quality safety eyeglasses should be used when shooting any firearm. DO NOT use ammunition exceeding standard factory pressure levels.

NOTE: The use of any after market product in your firearm may limit or void the manufactures warranty.

WARNING - Failure to follow this procedure may result in accidental discharge, firearm damage and serious bodily injury. Always be certain that your firearm is functioning properly before use.

WARNING - W. C. Wolff Company urges caution when using reduced power hammer or striker springs in firearms, particularly in firearms used for critical applications such as law enforcement. Reduction of the hammer or striker spring may compromise the reliability of the firearm.

 
   LIMITED LIABILITY and WARRANTY
W. C. WOLFF COMPANY GUARANTEES THAT ITS PRODUCTS ARE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP. IN THE EVENT OF ANY DEFECTS IN MATERIAL OR WORKMANSHIP, W. C. WOLFF COMPANY'S SOLE LIABILITY THEREFORE SHALL BE THE REPLACEMENT OF ANY SUCH PRODUCT(S) THAT ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. THE REPLACEMENT OF ANY SUCH PRODUCT(S) SHALL BE W. C. WOLFF COMPANY'S SOLE RESPONSIBILITY. THIS WARRANTY SPECIFICALLY EXCLUDES ANY AND ALL CONSEQUENTIAL OR ACCIDENTAL DAMAGES. NO OTHER WARRANTIES OR LIABILITY WHATSOEVER, ARE EITHER EXPRESSED OR IMPLIED. IF ANY SUCH WARRANTIES SHALL BE IMPOSED BY LAW NOTWITHSTANDING THIS PROVISION, THEN SUCH WARRANTIES SHALL BE THE RESPONSIBILITY OF W. C. WOLFF COMPANY'S IMMEDIATE BUYER. BY WAY OF EXAMPLE, AND NOT LIMITATION, THERE SHALL BE NO WARRANTIES OF MERCHANTABILITY, USE OF TRADE, OR FITNESS FOR A PARTICULAR PURPOSE.
W. C. WOLFF COMPANY
GUNSPRINGMAKERS
P.O.Box 458, Dept. 100
Newtown Square, PA 19073-0458
USA


Copyright © 1997-2006  W. C. Wolff Company
All rights reserved.
W. C. Wolff Company online publications are intended for the use of W. C. Wolff Company customers for the purposes of researching and purchasing products offered for sale by W. C. Wolff Company.  This publication may not be copied, duplicated, modified or redistributed in whole or part without the prior written permission of W. C. Wolff Company.