|
|
|
|
|
|
|
Link to Colt Semi-Auto Pistols
SHOOTER'S PAK - Reduced Power
Pak contains a Wolff reduced power trigger return spring and a 10 pound
reduced power hammer spring. Pak offers improved double action trigger performance.
Stock No. 17151.....$ 9.00 
Stock No. 17520 - each.....$ 5.99
Stock No. 17521 - pak of 3.......$ 14.99
Stock No. 17522 - pak of 10.....$ 34.99
HAMMER SPRING
Our reduced power hammer spring helps improve the double action trigger
pull. When used in combination with a reduced power trigger return spring
a smoother and lighter action is obtained. Not for Trooper MKIII - see
below.
SHOOTER'S PAK - Reduced Power
Pak contains a Wolff reduced power trigger return spring and an 11.5 pound
and 13 pound reduced power hammer spring. Pak offers improved double action
trigger performance. Note: factory hammer springs is 16.5 pounds.
Stock No. 30470.....$ 10.99
Trigger Return Spring - See Anaconda/Trooper MKV above.
Hammer Springs
Stock Number 30471......11.5 Lb-
reduced power - each..............$ 4.29
Stock Number 30472......11.5 Lb-
reduced power - pak of 3........$ 8.99
Stock Number 30473......11.5 Lb-
reduced power - pak of 10......$ 19.99
Stock Number 30474......13 Lb -
reduced power - each..............$ 4.29
Stock Number 30475......13 Lb - reduced
power - pak of 3........$ 8.99
Stock Number 30476......13 Lb - reduced
power - pak of 10......$ 19.99
Stock Number 30477......16.5 Lb -standard
power - each..............$ 4.29
Stock Number 30478......16.5 Lb- standard
power - pak of 3........$ 8.99
Stock Number 30479......16.5 Lb- standard
power - pak of 10......$ 19.99
Please note: Springs below are specifically
for Colt, EMF and Uberti single action revolvers. Springs will also
fit most other clones although some fitting may be required.
REVOLVER SHOOTERS PAKS
Paks include a Wolff reduced power mainspring, a reduced power sear/bolt
spring (traditional flat-type or wire-type), extra power base pin spiring
and stainless steel hand ejector spring. Kit offers great improvement
in the trigger and maintains reliability.
Paks with traditional flat-type sear/bolt spring - reduced power
Stock No. 32325.....Colt SAA & EMF Hartford, most clones..... $23.99
Stock No. 32326.....Uberti Regulator..... $23.99
Paks with wire-type sear/bolt spring - reduced power
Stock No. 32327.....Colt SAA and most clones.....$23.99
Stock No. 32328.....EMF Hartford.....$23.99
Stock No. 32329.....Uberti Regulator.....$23.99
WOLFF MAINSPRINGS - Reduced Power
Wolff Single Action mainsprings are a unique design with the center material
of the spring removed. This greatly reduces trigger pull but maintains
the balance of the spring resulting in a smooth, reliable action. Used
in combination with Wolff reduced power sear/bolt springs, a great improvement
in trigger functions is achieved with only a spring change. As there are
variations in these guns, exact measurements are not possible. Most
clones not listed below should use Colt springs -fitting may be required.
Stock No. 32280.....Colt/EMF/most clones - each.....$15.00
Stock No. 32281.....Colt/EMF/most clones - pak of 3.....$42.99
Stock No. 32282.....Colt/EMF/most clones - pak of 10.....$139.99
Stock No. 32285.....Uberti Regulator - each.....$15.00
Stock No. 32286.....Uberti Regulator - pak of 3.....$42.99
Stock No. 32287.....Uberti Regulator - pak of 10.....$139.99
WOLFF SEAR/BOLT SPRINGS - Reduced Power
Wolff sear/bolt springs for Single Action revolvers are available in the
traditional flat-type or in wire-type. Both are reduced power. The
wire-type spring offers the greatest improvement in function for as smooth,
light trigger.
Flat-Type Spring
Stock No. 32290.....Colt, EMF, Uberti, most clones - each.....$6.49
Stock No. 32291.....Colt, EMF, Uberti, most clones - pak of 3.....$17.99
Stock No. 32292.....Colt, EMF, Uberti, most clones - pak of 10.....$57.99
Wire-Type spring
Stock No. 32294.....Colt, Uberti, most clones - each.....$6.49
Stock No. 32295.....Colt, Uberti, most clones - pak of 3.....$17.99
Stock No. 32296.....Colt, Uberti, most clones - pak of 10.....$57.99
Stock No. 32297.....EMF only - each.....$6.49
Stock No. 32298.....EMF only - pak of 3.....$17.99
Stock No. 32299.....EMF only - pak of 10.....$57.99
BASE PIN SPRINGS - Extra Power
Base pin springs are used on Colt, Uberti and many
closes. Not used on the EMF Hartford. This critical spring latches
the cylinder pin in place and is often weak or too light. Wolff extra power
base pin springs provide positive latching to help prevent the possibility
of the cylinder pin becoming unlocked.
Stock No. 32277.....XP base pin spring - each
.....$3.49
Stock No. 32278.....XP base pin spring - pay of 3
.....$7.49
Stock No. 32279.....XP base pin spring - pay of 10
.....$16.99
HAND EJECTOR SPRING - Stainless Steel
Wolff stainless steel hand ejector spring replaces original spring which
is commonly weakened from rust.
Fits Colts and most clones.
Stock No. 16381 - each.....$ 4.29
Stock No. 16382 - Pak of 3.......$ 10.99
Stock No. 16383 - pak of 10.....$ 22.99
[
TOP]
| Copyright © 1997-2007
W. C. Wolff Company All rights reserved. W.C. Wolff Company online publications are intended for the use of W. C. Wolff Company customers for the purposes of researching and purchasing products offered for sale by W. C. Wolff Company. This publication may not becopied, duplicated, modified or redistributed in whole or part without the prior written permission of W. C. Wolff Company |