WOLFF RIFLE & SHOTGUN SPRINGS
Wolff coil-type replacement rifle and shotgun springs are designed to replace weakened, damaged or broken springs in many popular models. These springs, unless otherwise noted, are ready for immediate installation and require no fitting. Most hammer and striker springs are pre-ground, deburred and set. Standard Power replacement springs are designed to provide essentially original factory specification power output. Extra Power springs are designed to provide approximately 15% extra power over the original factory springs. In the case of striker and hammer springs, the result is faster lock-time and positive ignition. Extra power recoil springs help insure positive breeching and improved performance.
Rifle Service Paks offer one each of the available coil-type springs required to return the particular rifle to original factory condition. Included in the service pak is the lowest rated Blitzschnell spring available. We recommend that Wolff replacement rifle springs be installed by a Gunsmith.
BLITZSCHNELL® precision speed-lock rifle striker springs for bolt-action rifles are made from the highest quality, high-tensile round section wires, as are all Wolff Springs. Each Blitzschnell striker spring has squared ends and is individually hand ground to provide flat seats, cleaned and oiled for long life and solid performance and require no fitting. Blitzschnell striker springs provide dramatic improvement in lock-time over fatigued and factory springs which can greatly improve accuracy and reliability of bolt-action rifles. Load ratings indicated are with the striker (firing pin) in the cocked position and for rifle actions equipped with standard factory parts and designs. Custom triggers and bolt modifications may change the specified ratings. We also suggest that you check for proper protrusion of the striker end from the bolt face. The optimum protrusion should be about .060" and no more than .065" to prevent primer puncture. Each Blitzschnell striker spring is individually packaged and identified, and is ready for immediate installation and use.
MAGAZINE SPRINGS are available for many rifles and shotguns including many direct replacement magazine springs. If you do not see a magazine springs for a specific model, please see our selecfion of general purpose replacement tubular magazine springs for rifles and shotguns.