 |
 |
 |
| |
|
|
RECOIL SPRING restores original factory spring
specifications and function to pistol. A striker spring is included.
Stock No. 24030.....$ 7.89 ea
MAGAZINE SPRINGS are +5% extra power to assure proper
feeding in pistols with weakened or broken springs.
Stock No. 70361 - each.............$ 7.49
Stock No. 70363 - pak of 3.......$ 17.29
Stock No. 70364 - pak of 10.....$ 47.99
SERVICE PAK - TYPE I contains the following springs to
replace
weakened or broken springs, returning the pistol to original factory
condition:
recoil spring, striker spring, extractor spring, sear spring, trigger
spring
and magazine catch safety spring.
Stock No. 69031-Type I.....$ 10.49 ea
SERVICE PAK - TYPE II contains all springs in Type I pak
above
and a +5% extra power magazine spring.
Stock No. 69032-Type II.....$ 15.79 ea
RECOIL SPRING restores original factory spring
specifications and function to pistol. Pak also includes a firing pin
spring.
Stock No. 24031.....$ 7.89 ea
MAGAZINE SPRINGS are +5% extra power to assure proper
feeding in pistols with weakened or broken springs.
Stock No. 74861 - each.............$ 7.49
Stock No. 74863 - pak of 3.......$ 17.29
Stock No. 74864 - pak of 10.....$ 47.99
SERVICE PAK - TYPE I contains the following springs to
replace
weakened or broken springs, returning the pistol to original factory
condition:
recoil spring, firing pin spring, hammer spring, extractor spring,
trigger
spring and magazine catch spring.
Stock No. 69041 -Type I.....$ 12.99
SERVICE PAK - TYPE II contains all springs in Type I pak
above
and a +5% extra power magazine spring.
Stock No. 69042 -Type II.....$ 18.29
RECOIL SPRINGS are available with load-rated specifications. Each load-rated recoil spring package includes an extra power firing pin spring.
MAGAZINE SPRINGS for Beretta 84 only are available in +5% and
+10% extra power offering a choice of springs for optimum magazine
performance. The stronger spring is especially recommended when using
extra power recoil springs above.
Stock No. 70461 +5% XP - each.............$ 7.49
Stock No. 70463 +5% XP - pak of 3.......$ 17.29
Stock No. 70464 +5% XP - pak of 10.....$ 47.99
Stock No. 70471 +10% XP - each.............$ 7.49
Stock No. 70473 +10% XP - pak of 3.......$ 17.29
Stock No. 70474 +10% XP - pak of 10.....$ 47.99
Wolff
Trigger Conversion Unit
For
Beretta 92 & 96 Series Pistols
Patents Pending
This product was developed at the request of INS (Immigration and
Naturalization Service), the largest federal law enforcement agency in
the country, to
solve the problem of trigger spring breakage in their duty
weapons.
Now, after more than a year of development and tens of thousands of
rounds
of punishing testing by INS and Wolff Gunsprings, we are pleased
top
make this available to everyone. This product is a must for law
enforcement
as well as the serious shooter.
This coil spring trigger return unit requires no modifications at all to the pistol other than the removal of the factory trigger spring. The main benefit of this unit is the elimination of trigger spring breakage. Additional features include smoother trigger pulls and improved staging. This units make an already fine pistol even better!
The components are custom manufactured for Wolff Gunsprings to exacting standards. The coil spring of course is manufactured by us to our normal high standards. The cam and pin are coated with Robar's NP3® finish for improved lubricity. Each unit is then hand assembled and inspected before delivery.
We are offering three variations of the unit. The INS unit
which is essentially equivalent to factory strength. A reduced
power unit for lighter pulls and an extra power unit for faster,
crisper returns. This is the product you have been waiting for to
enhance your Beretta 92
or 96 series pistol.
Download Installation Instructions (.PDF)
| PLEASE NOTE: Will not function in latest Beretta 92/96 pistols with polymer triggers. and newer Taurus models due to design changes in these pistols. |
Stock No. 32371- INS Unit (Factory Strength) - each.............$
19.99 
Stock No. 32373- Extra Power - each.............$ 19.99
Stock No. 32372- Reduced Power - each.............$ 19.99
Stock No. 32375 - Combination Pak - 1 each of above 3
units.............$ 55.99
Wolff
Guide Rods
For
Beretta 92 & 96 Series Pistols
Wolff guide rods for Beretta 92 & 96 series pistols are a
precision,
hi-quality one piece steel quide rod. Designed for optimum
performance
they replace the standard factory 2-piece guide metal rods and the new
plastic
guide rods used in all newer Beretta pistols. Rods are hardened
to a
minimum RC-55 for durability. Available in black or bright polished
finished.
Stock No. 32715 - Black Finish - each.............$ 24.95
Stock No. 32716 - Bright Finish - each.............$ 24.95
RECOIL
SPRINGS for Beretta 92 and 96 series pistols are
available with load-rated specifications to tailor the recoil function
to individual needs. Each load-rated recoil spring pak includes an
extra power firing pin spring.
Recoil Springs
For use in:
Beretta 92 Series 9mm - Full Size
Beretta 96 Series .40 S&W - Full Size
RECOIL CALIBRATION PAK - Beretta 92/96 full size contains 1
each extra power recoil springs in 15, 16, 18 and 20 pounds. Three
extra power firing pin springs are also included.
Stock No. 13190.....$ 24.99
PERFORMANCE PAK - Beretta 92/96 series full size contains 1
each 10 Lb. reduced power recoil spring, 15 Lb. extra power recoil
spring, extra power firing pin spring and 18 Lb. reduced power hammer
spring.
Stock No. 14030.....$ 15.99
Recoil Springs
For use in:
Beretta 92 Series 9mm - Compact Models
Beretta Centurion .40 S&W
For use in:
Beretta 92 Series 9mm - Full Size & Compacts
Beretta 96 Series .40 S&W - Full Size
Beretta Centurion .40 S&W
HAMMER SPRING PAK - reduced power, contains 1 each of 16, 17,
18 and 19 pound reduced power hammer springs listed above, allowing
adjustment of the firearm to individual requirements.
Stock No. 26505.....$ 10.80
COMPETITION HAMMER SPRING - reduced power. We have
developed an
ideal lightweight hammer spring rated at 13 pounds designed just for
competition. Spring improves trigger pull and feel essential for
the
serious competitive shooter. Please order above.
For use in:
Beretta 92 Series 9mm - Full Size & Compacts
Stock No. 74061 +5% XP - each.....$ 7.49
Stock No. 74063 +5% XP - pak of 3.......$ 17.29
Stock No. 74064 +5% XP - pak of 10.....$ 47.99
Stock No. 74071 +10% XP - each.....$ 7.49
Stock No. 74073 +10% XP - pak of 3.......$ 17.29
Stock No. 74074 +10% XP - pak of 10.....$ 47.99
For use in:
Beretta 96 Series .40 S&W - Full size
Beretta Centurion .40 S&W
Stock No. 76871 +10% XP - each.....$ 7.49
Stock No. 76873 +10% XP - pak of 3.......$ 17.29
Stock No. 76874 +10% XP - pak of 10.....$ 47.99
PISTOL SERVICE PAKS
Service paks offer a complete spring change for the pistol restoring
original factory specifications.
Type-I contains the following factory specification springs:
Recoil
Spring
Trigger
Spring
Extractor Spring
Firing Pin Spring (XP) Trigger Bar
Spring Magazine
Catch Spring
Hammer
Spring
Slide Lock Spring
Stock No. 69521 Type-I for Beretta 92/96 Full Size Models.......$
18.99
Stock No. 69525 Type-I for Beretta 92/96 Compact Models.......$
18.99
TYPE-II contains all of the springs described in the Type-I pak above and a +5% extra power magazine spring.
Stock No. 69522 Type-II for Beretta 92 Full Size Models.......$
24.59
Stock No. 69523 Type-II for Beretta 96 Full Size Models.......$
24.59
Stock No. 69526 Type-II for Beretta 92 Compact Models.......$
24.59
Stock No. 69527 Type-II for Beretta 96 Compact Models.......$
24.59
For use in:
Beretta 92 & 96 Series & Centurian - Full Size &
Compacts
High quality spring for replacement for these often broken springs.
Stock No. 32271 - each...............$ 3.49
Stock No. 32272 - pak of 3.........$ 7.49
Stock No. 32273 - pack of 10.....$ 16.99
TRIGGER BAR SPRINGS
For use in:
Beretta 92 & 96 Series & Centurian - Full Size
& Compacts
High quality springs for replacement of trigger bar springs which are easily lost.
Stock No. 32261 - each...............$ 3.49
Stock No. 32262 - pak of 3.........$ 7.49
Stock No. 32263 - pack of 10.....$ 16.99
For use in:
Beretta 92 & 96 Series - All models; full size &
compacts
We have changed the design of these springs by adding additional length to the leg that engages the slide lock. This prevents the very common problem of the spring jumping off the slide lock during installation.
Stock No. 32274 - each...............$ 3.49
Stock No. 32275 - pak of 3.........$ 7.49
Stock No. 32276 - pack of 10.....$ 16.99
[TOP]
| Copyright ©
1997-2008 W. C. Wolff Company All rights reserved. W. C. Wolff Company online publications are intended for the use of W. C. Wolff Company customers for the purposes of researching and purchasing products offered for sale by W. C. Wolff Company. This publication may not be copied, duplicated, modified or redistributed in whole or part without the prior written permission of W. C. Wolff Company |