Includes:  EAA Witness, AT-84, CZ-75, TZ-75 (Including 88 series)
                and Springfield Armory P-9 Series

Recoil Springs
    Full Size Models
    Longslide Models
    Compact Models .

Recoil Calibration Paks
Hammer Springs
Hammer Spring Paks
Extractor Springs - XP
Magazine Springs
 

For use in:
 Standard Size Models

    Factory Rating:    14 Lb. - 9mm, .45 ACP & Super .38
    Factory Rating:    12 Lb. - .40 S&W all models except CZ
    Factory Rating:    16 Lb. - .40 S&W - CZ Only
    Factory Rating:    13 Lb. - CZ 97 .45 ACP   (14-16 Lb springs suggested for hardball in CZ97)

• Ratings Available:  8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 20 and 22 Lb.

Stock No. 497xx.....EAA pistols only.....$ 7.89 ea 
Stock No. 430xx.....CZ, TZ, P9 and all other models.....$ 7.89 ea 
   Please Note: Replace the "xx" in the stock number with the pound rating of spring.
  Please specify if your CZ is a "B" model

For use in:
   Longslide Models (LSP)

    Factory Rating:     10 Lb. - 9mm
    Factory Rating:     12 Lb. - .40 S&W

• Ratings Available:  7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18 and 20  Lb.

Stock No. 498xx.....EAA Longslide pistols only.....$ 7.89 ea 
Stock No. 431xx.....TZ, P9 and all other Longslide models.....$ 7.89 ea  
   Please Note: Replace the "xx" in the stock number with the pound rating of spring.

For use in:
  Compact Models, 9mm & .40 S&W
  Note: Will not fit models with dual recoil spring systems

• Reduced Power...: 14 and 16 Lb.
• Factory Standard.: 17 Lb.
• Extra Power.........: 18, 20 and 22 Lb.

RECOIL CALIBRATION PAK - Standard Models
Pak contains 1 each reduced power recoil springs in 9, 10, 11 and 12 pounds. Three extra power firing pin springs are also included for both EAA and other models.
Stock No. 13120.....$ 24.99 ea 

RECOIL CALIBRATION PAK- Standard Models
Pak contains 1 each extra power recoil springs in 16, 18, 20 and 22 pounds. Three extra power firing pin springs are also included for both EAA and other models.
Stock No. 13121.....$ 24.99 ea 

RECOIL CALIBRATION PAK - Longslide models
Pak contains 1 each extra power recoil springs in 12, 14, 16 and 18 pounds. Three extra power firing pin springs are also included for both EAA and other models.
Stock No. 13123.....$ 24.99 ea 

PERFORMANCE PAK - Standard Models, 9mm
Pak contains 1 each 12 Lb. reduced power recoil spring, 16 Lb. extra power recoil spring, extra power firing pin spring and 17 Lb. reduced power hammer spring.
Stock No. 14100.....$ 13.99 ea 

HAMMER SPRINGS

IMPORTANT NOTE:
Tanfoglio frame pistols have 2 different hammer spring configurations: A) the traditional long hammer spring (about 2.5" long) which extends down the back of the grip. B) newer EAA pistols have a short hammer spring (about 1.25" long) which is mounted transversely in the frame and does not extend down the back of the grip. Please order the correct spring for your pistol.

A. Traditional hammer spring configuration

For use in:
  Standard & Longslide models - All cal's except .45

• Reduced Power...: 15, 16, 17, 18 and 19 Lb.
• Factory Standard.: 20 Lb.
• Extra Power.........: 22, 24, and 26 Lb.

For use in:
  Compact Models - All caliber's

• Reduced Power...: 16, 17 and 18 Lb.
• Factory Standard.: 19 Lb.
• Extra Power.........: None available

B. Short transverse hammer spring models - EAA

• Reduced Power...: 13, 14 and 15 Lb.
• Factory Standard.: 16 Lb.
• Extra Power.........: 17, 18, 20 and 22 Lb.

HAMMER SPRING PAKS

For use in: Traditional configuration, standard & longslide models
This hammer spring pak contains 1 each of 16, 17, 18 and 19 pound reduced power hammer springs described above, allowing adjustment of the firearm to individual requirements.
Stock No. 26506.....$ 10.80 

For use in: short transverse hammer spring models
This hammer spring pak contains 1 each of 18, 20 and 22 pound extra power hammer springs described above, improving ignition and reliability, particularly with hard primer ammo.
Stock No. 26508.....$ 9.00 

For use in: newer short transverse hammer spring models
This hammer spring pak contains 1 each of 13, 14 and 15 pound reduced power hammer springs described above.
Stock No. 26507.....$ 9.00 

EXTRACTOR SPRINGS
Extra power extractor springs are available to correct extraction problems common in the CZ-75/85 series pistols - all calibers.  Wolff springs are approximately 25% stronger than factory springs.  Will also function in EAA Witness, Springfield P-9 and most CZ clone pistols.
Stock No. 32010 - each.....$ 3.49
Stock No. 32011 - pak of 3.......$   7.49
Stock No. 32012 - pak of 10.....$ 15.99  

MAGAZINE SPRINGS
Magazine springs are available in +5% and +10% extra power.  Extra power magazine springs help improve feeding with extra power recoil springs and when factory springs have weakened.

For use in:
  AT-84, CZ-75*, TZ-75, P-9 - Standard & Longslides - All Caliber's Except 10mm

Stock No. 74261 +5% XP - each.....$ 7.49 
Stock No. 74263 +5% XP - pak of 3...... $ 17.29 
Stock No. 74264 +5% XP - pak of 10.....$ 47.99 

Stock No. 74271 +10% - each.....$ 7.49 
Stock No. 74273 +10% - pak of 3.......$ 17.29 
Stock No. 74274 +10% - pak of 10.....$ 47.99 

For use in:
  AT-84, CZ-75, TZ-75, P-9 - Compact Models

Stock No. 75861 +5% XP - each.....$ 7.49 
Stock No. 75863 +5% XP - pak of 3.......$ 17.29 
Stock No. 75864 +5% XP - pak of 10.....$ 47.99 
 

 [ TOP ]
 

Copyright © 1997-2008  W. C. Wolff Company    All rights reserved.     W. C. Wolff Company online publications are intended for the use of W. C. Wolff Company customers for the purposes of researching and purchasing products offered for sale by W. C. Wolff Company.  This publication may not be copied, duplicated, modified or redistributed in whole or part without the prior written permission of W. C. Wolff Company