SIGARMS/SIG-SAUER Pistols
RECOIL SPRINGS are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring.
P220 RECOIL SPRING NOTES:
1. Current production has green painted recoil
springs rated at 20 Lbs.
2. Earlier models had a black recoil spring rated at
15
Lbs.
3. Super .38 model has a 14 Lb. factory recoil
spring.
4. Browning BDA .45 has a 14 Lb. factory recoil
spring.
RECOIL CALIBRATION PAK contains 1 each of the above recoil
springs in 15, 16, 18 and 20 pounds. Three extra power firing pin
springs are also included.
Stock No. 13177.....$ 24.99
HAMMER SPRINGS
Sig P220's recently changed hammer springs. Models before serial number
219166
use "short" hammer springs listed below. Serial numbers above 219166
use
the same hammer spring as the Sig P226 with a factory rating of 24 Lbs.
See Plastic Hammer Spring
Base Springs
if your P220 has the new plastic
retainer/base for the hammer spring
For use in:
P-220 with serial numbers
below
219166
For use in:
P220 with serial numbers above
219166
HAMMER SPRING PAK - reduced power.
This pak contains 1 each of 18, 19 and 20 pound reduced power hammer
springs
described above. For use in P220 with
serial
numbers below 219166.
Stock No. 26574.....$ 9.00
HAMMER SPRING PAK - reduced power.
This pak contains 1 each of 16, 17, 18 and 19 pound reduced power
hammer springs
above, allowing adjustment of the firearm to individual requirements.
For use in P220 with serial numbers above
219166.
Stock No. 26575.....$ 10.80
MAGAZINE SPRINGS are available in +5% and +10% extra power
allowing a choice of springs for optimum magazine performance.
*Please
Note: In newer P220's using the green recoil spring, the Wolff +10%
magazine spring
is factory standard and the +5% would be reduced power.
Note: Wolff
magazine springs will not fit new 8 round P220 magazines
made by Mec-Gar .
For P-220 Magazine with Floorplate
Locking Tab on Spring (Metal Floorplates)
Stock No. 70861 +5% XP* - with locking tab - each.....$ 7.49
Stock No. 70871 +10% XP* - with locking tab - each.....$
7.49![]()
Stock No. 70873 +10% XP* - with locking tab - pak of 3.......$
17.29![]()
Stock No. 70874 +10% XP* - with locking tab - pak of 10.....$ 47.99![]()
For P-220 Magazine button lock (Plastic) floorplates
Stock No. 79371 +5% XP* - with locking tab - each.....$ 7.49
Stock No. 79373 +5% XP* - with locking tab - pak of 3.......$ 17.29![]()
Stock No. 79374 +5% XP* - with locking tab - pak of 10.....$ 47.99
RECOIL SPRINGS
CONVENTIONAL RECOIL springs are available with load-rated
specifications to
tailor the recoil function to individual needs. Each load-rated recoil
spring
pak includes an extra power firing pin spring. Note: The P229 in
.357
Sig has a 17 pound factory recoil spring.
For use in:
P225 & P228, 9mm
P229, .40 S&W, 9mm
RECOIL CALIBRATION PAK for Sig P225/228/229 contains 1 each
of the
above extra power recoil springs in 17, 19, and 21 pounds. Three extra
power
firing pin springs are also included.
Stock No. 13194.....$ 18.79
HAMMER SPRINGS
For use in:
P225, P226, P228 and P229
P220 with serial numbers above 219166.
HAMMER SPRING PAK - reduced power.
This pak contains 1 each of 16, 17, 18 and 19 pound reduced power
hammer springs
above, allowing adjustment of the firearm to individual requirements.
Stock No. 26575.....$ 10.80
See Plastic Hammer Spring
Base Springs
if your P225-229 has the new plastic
retainer/base for the hammer spring
MAGAZINE SPRINGS
Magazine springs are available in +5% extra power for the P225 and in
+5%
and +10% extra power for the P226, P228 and P229 allowing a choice of
springs
for optimum magazine performance. The stronger spring is especially
recommended
when using extra power recoil springs.
For use in:
P225 - 8 round magazines
Stock No. 75061 +5% XP - each.....$ 7.49
Stock No. 75063 +5% XP - pak of 3......$ 17.29
Stock No. 75064 +5% XP - pak of 10....$ 47.99
For use in:
P228 - 13 round magazines
P229 - 12 round magazines
P226 - 15 round magazines
Stock No. 74361 +5% XP - each.....$ 7.49
Stock No. 74363 +5% XP - pak of 3.......$ 17.29
Stock No. 74364 +5% XP - pak of 10.....$ 47.99
Stock No. 74371 +10% XP - each.....$ 7.49
Stock No. 74373 +10% XP - pak of 3.......$ 17.29
Stock No. 74374 +10% XP - pak of 10.....$ 47.99
For Use in:
All Sig 10 round magazines for P226, P228 and
P229.
Stock No. 78271 +10% XP - each.....$ 7.49
Stock No. 78273 +10% XP - pak of 3.......$ 17.29
Stock No. 78274 +10% XP - pak of 10.....$ 47.99
Recoil Springs
Recoil Calibration Paks
Hammer Springs
Magazine Springs
P226 - CONVENTIONAL RECOIL SPRINGS are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring. Springs also for use in P220
RECOIL CALIBRATION PAK for Sig P226 contains 1 each of the
above
conventional recoil springs in 15, 16, 18, and 20 pounds. Three extra
power
firing pin springs are also included.
Stock No. 13209.....$ 24.99
RECOIL CALIBRATION PAK for Sig P226 contains 1 each of the
above
conventional recoil springs in 20, 22 and 24 pounds. Three extra power
firing
pin springs are also included.
Stock No. 13178.....$ 18.79
VARIABLE RECOIL CALIBRATION PAK for Sig P226 contains 1 each
of
the above extra power variable recoil springs in 16, 17, 18, and 19
pounds.
Three extra power firing pin springs are also included.
Stock No. 13193.....$ 24.99
VARIABLE RECOIL CALIBRATION PAK for Sig P226
contains
1 each of the above reduced power variable recoil springs in 10, 11,
12,
13 and 14 pounds. Three extra power firing pin springs are also
included.
Stock No. 13179.....$ 31.49
PERFORMANCE PAK for Sig P226 contains 1 each 11 Lb. reduced
power variable recoil spring, 18 Lb. extra power recoil spring, extra
power firing pin spring and 17 Lb. reduced power hammer spring.
Stock No. 14300.....$ 13.99
For use in:
P-225, P-226, P-228 and P-229
P220 with serial numbers above 219166
HAMMER SPRING PAK - reduced power.
This pak contains 1 each of 16, 17, 18 and 19 pound reduced power
hammer springs
above, allowing adjustment of the firearm to individual requirements.
Stock No. 26575.....$ 10.80
Plastic Hammer Spring
Base
Models - models P220 thru P229
Recently SigArms has started using a plastic hammer spring
base/retainer with
a short hammer spring. This is being phased in across all
models. If your pistol has the plastic base/retainer for the
hammer spring the following
springs are for your pistol.
HAMMER SPRING PAK -
reduced power.
This pak contains 1 each of 17, 18 and 19 pound reduced power
hammer
springs above, allowing adjustment of the firearm to individual
requirements.
Plastic hammer spring base models only.
Stock No. 32356.....$ 9.00
MAGAZINE SPRINGS
Magazine springs are available in +5% and +10% extra power for the
P-226,
P-228 and P-229 allowing a choice of springs for optimum magazine
performance.
The stronger spring is especially recommended when using extra power
recoil
springs.
For use in:
P-226 - 15 round magazines
P-228 - 13 round magazines
P-229 - 12 round magazines
Stock No. 74361 +5% XP - each.....$ 7.49
Stock No. 74363 +5% XP - pak of 3.......$ 17.29
Stock No. 74364 +5% XP - pak of 10.....$ 47.99
Stock No. 74371 +10% XP - each.....$ 7.49
Stock No. 74373 +10% XP - pak of 3.......$ 17.29
Stock No. 74374 +10% XP - pak of 10.....$ 47.99
For Use in:
All Sig 10 round magazines for P226, P228 and
P229.
Stock No. 78271 +10% XP - each.....$ 7.49
Stock No. 78273 +10% XP - pak of 3.......$ 17.29
Stock No. 78274 +10% XP - pak of 10.....$ 47.99
RECOIL SPRINGS
CONVENTIONAL RECOIL springs are available with load-rated
specifications to
tailor the recoil function to individual needs. Each load-rated recoil
spring
pak includes an extra power firing pin spring.
RECOIL CALIBRATION PAK for Sig P230/P232 contains 1 factory
standard recoil spring and 1 each extra power recoil springs in
16 and 18 pounds.
Three extra power firing pin springs are also included.
Stock No. 30490.....$ 18.79
HAMMER SPRINGS
For use in:
P-230 Only with serial
numbers
below: Blue Models: S165076
Stainless Models: S053921
HAMMER SPRING PAK - reduced power.
This pak contains 1 each of 16, 17 and 18 pound reduced power hammer
springs
above, allowing adjustment of the firearm to individual requirements.
Stock No. 30230.....$ 9.00

HAMMER SPRINGS



[TOP]
| Copyright ©
1997-2006 W. C. Wolff Company All rights reserved. W. C. Wolff Company online publications are intended for the use of W. C. Wolff Company customers for the purposes of researching and purchasing products offered for sale by W. C. Wolff Company. This publication may not be copied, duplicated, modified or redistributed in whole or part without the prior written permission of W. C. Wolff Company |