SPRINGFIELD Pistols
 

     Please see Colt 1911 Series Pistols
 

    Please see EAA Witness pistols.

RECOIL SPRING are available in load-rated specifications to adjust the recoil function to individual needs. Each load rated recoil spring includes an extra power firing pin spring.
   Note: Springs not for use in dual recoil spring models

• Reduced Power...: 18 and 20 Lb.
• Factory Standard.: 22 Lb.
• Extra Power.........: 24 Lb.

HAMMER SPRINGS (mainsprings)
  Not for use in ILS Model Pistols - See note at top of page

Note: Champion uses full size Colt hammer springs

For use in:
    Compact, Ultra Compact & V-10

• Reduced Power...: 19 Lb.
• Factory Standard.: 22 Lb.
• Extra Power.........: None Available

HAMMER SPRING PAK - reduced power
This pak contains 1 each of 24, 26 and 28 pound reduced hammer springs listed below, allowing adjustment of the firearm to individual requirements.
Stock No. 32357.....$ 9.00

• Reduced Power...: 24, 26, 28 Lb.
• Factory Standard.: 30 Lb.
• Extra Power.........: None Available

RECOIL SPRING are available in load-rated specifications to adjust the recoil function to individual needs. Each load rated recoil spring includes an extra power firing pin spring.

• Reduced Power...: 18.5, 20 and 22 Lb.
• Factory Standard.: 24 Lb.

RECOIL CALIBRATION
Recoil calibration paks are offered to allow the shooter a choice of recoil springs to calibrate the recoil function when the correct spring rating is not known. These paks offer a savings of 20% over the same purchase of individual springs. The shooter starts with the strongest spring in the pak and works down until the desired recoil function is obtained.

This Pak Also Fits::
Colt Officers, .45 ACP with full diameter/length recoil guide rods only
Kimber Compact, .45 ACP
Para Ordnance P-12, .45 ACP

This pak contains 1 each of 18.5, 20, 22 and 24 pound recoil springs.  These are direct replacements for Kimber, Para Ordnance and Springfield models listed above.  For Colt Officers a full diameter (.330"/.332") rods must be used. Not for use with factory guide rods in Colt Officers Model.  3 extra power firing pin springs are also included.
Stock No. 13201.....$ 24.99 
 

HAMMER SPRINGS (mainsprings)
    Same as Springfield Compact above.
 

SPRINGFIELD XD Series Pistols 

XD 4" Series Pistols  Only - in 9mm, .40 S&W and .357 Sig

RECOIL SPRINGS & GUIDE RODS

Wolff recoil guide rods for the Springfield 4" XD Series pistols allows the use of Wolff recoil springs in various weights to allow tuning of the recoil function.  Wolff springs require the use of the Wolff guide rod.  The factory spring is not compatable with our guide rod.

Wolff XD guide rods are a precision, hi-quality one piece steel quide rod.  Designed for optimum performance they replace the standard factory recoil system. Rods are hardened to a minimum RC-55 for durability. Available in a durable black finish.  Available individually or with a Wolff recoil spring.

Stock No. 52600 - XD 4" Guide Rod Only - Black Finish - each.............$ 24.99

RECOIL SPRINGS are available in load-rated specifications to adjust the recoil function to individual needs. Each load rated recoil spring includes a factory strength striker spring.  Springs are available individually or with a guide rod.  Springs must be used with Wolff  recoil guide rod above.

• Reduced Power...: None available
  
• Factory Standard.: 17 Lb. (9mm, .40 S&W and .357 Sig)
  
• Extra Power........: 19 and 21 Lb
  

RECOIL CALIBRATION  PAK
Recoil calibration pak for the Springfield XD 4" contains 1 each of the above recoil springs in 17, 19 and 21 pounds.  Springs must be used with Wolff  recoil guide rod above. Three extra power striker springs are also included.
Stock No. 13211.....$ 18.79

XD 5" Series Pistols - in 9mm, .40 S&W and .357 Sig

RECOIL SPRINGS are available in load-rated specifications to adjust the recoil function to individual needs. Each load rated recoil spring includes an factory striker spring. 

• Reduced Power...: 14, 15, 16
  
• Factory Standard.: 17 Lb.
  
• Extra Power........: 19 and 21 Lb
  

XD 5" Series Pistols - .45 ACP Only

RECOIL SPRINGS & GUIDE RODS

Wolff recoil guide rods for the Springfield 5" XD Series .45 ACP pistols allows the use of Wolff recoil springs in various weights to allow tuning of the recoil function. 

Wolff guide rods for XD .45 caliber pistols are a precision, hi-quality one piece steel quide rod.  Designed for optimum performance they replace the standard factory recoil system. Rods are hardened to a minimum RC-55 for durability. Finish is a durable black finish.  Available individually or with a Wolff recoil spring.

Stock No. 53100 - XD 5" .45 ACP Guide Rod Only - Black Finish - each.............$ 24.99

RECOIL SPRINGS are available in load-rated specifications to adjust the recoil function to individual needs. Each load rated recoil spring includes a factory strength striker spring.  Springs are available individually or with a guide rod.  Springs are for the XD 5" models in .45 ACP only.

• Reduced Power...: 14 and 16 Lb.
  
• Factory Standard.: 18.5 Lb.
  
• Extra Power........:  20 Lb
  

For use in:
  All XD Series 10 Round Magazines in 9mm, .40 S&W and .357 Sig
    Will not function in .45 Caliber XD or XD(M) magazines

Stock No. 78881 +5% XP - each.....$ 7.49
Stock No. 78883 +5% XP - pak of 3.......$ 17.29
Stock No. 78884 +5% XP - pak of 10.....$ 47.99

Stock No. 78891 +10% XP - each.....$ 7.49
Stock No. 78893 +10% XP - pak of 3.......$ 17.29
Stock No. 78894 +10% XP - pak of 10.....$ 47.99

For use in:
  XD Series Hi Capacity magazines
     9mm - 16 round
    .40 S&W - 12 round
    .357 Sig - 12 round

Stock No. 79511 +5% XP - each.....$ 7.49
Stock No. 79513 +5% XP - pak of 3.......$ 17.29
Stock No. 79514 +5% XP - pak of 10.....$ 47.99

Stock No. 79501 +5% XP - each.....$ 7.49
Stock No. 79503 +5% XP - pak of 3.......$ 17.29
Stock No. 79504 +5% XP - pak of 10.....$ 47.99

XD(M) 4.5" Series Pistols - 9mm, .40 S&W

RECOIL SPRINGS & GUIDE RODS

Wolff solid recoil guide rods for the Springfield 4.5" XD(M) Series pistols allows the use of Wolff recoil springs in various weights to allow tuning of the recoil function. 

Wolff XD(M) solid guide rods are a precision, hi-quality one piece steel quide rod.  Designed for optimum performance they replace the standard factory recoil system. Rods are hardened to a minimum RC-55 for durability. Available in a durable black finish.  Available individually or with a Wolff recoil spring.

Stock No. 54300 - XD(M) 4.5" Guide Rod Only - Black Finish - each.............$ 24.99

RECOIL SPRINGS are available in load-rated specifications to adjust the recoil function to individual needs. Each load rated recoil spring includes a factory strength striker spring.  Springs are available individually or with a guide rod.  Springs may be used with the Wolff solid guide rod or with the factory guide rod.

• Reduced Power...: 14 and 16 Lb.
  
• Factory Standard.: 18 Lb.
  
• Extra Power........:  20 and 22 Lb
  

RECOIL CALIBRATION PAK - Reduced Power
Recoil calibration pak for the Springfield XD(M) 4.5" pistol contains 1 each of the above recoil springs in 14, 16 and 18 pounds.  Allows tuning of the recoil function. Three factory power striker springs are also included.
Stock No. 13227.....$ 18.79

 [ TOP ]
 

Copyright © 1997-2009  W. C. Wolff Company   All rights reserved.   W. C. Wolff Company online publications are intended for the use of W. C. Wolff Company customers for the purposes of researching and purchasing products offered for sale by W. C. Wolff Company.  This publication may not be copied, duplicated, modified or redistributed in whole or part without the prior written permission of W. C. Wolff Company