Recoil Spring restores original factory spring specifications and function to pistol. Pak also includes a striker spring.

Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring.

• Reduced Power...: 14, 15, 16 & 17 Lb.
• Factory Standard.: 20 Lb.
• Extra Power.........: 24 Lb.

Hammer springs below are common to Walther pistol models PP, PPK, PPKS and P-38, 7.65mm and 9mm(.380) calibers.

• Reduced Power....: 13, 14, 16, 17, 18 & 19 Lb.
• Factory Standard..: 20 Lb.
• Extra Power.........: None Available

&nbs

Magazine Springs are available in +5% extra power to assure proper feeding in pistols with weakened or broken springs. These springs function in both 7.65mm and 9mm calibers.

Hammer springs below are common to Walther pistol models PP, PPK, PPKS and P-38, 7.65mm and 9mm(.380) calibers.

• Reduced Power...: 13, 14, 16, 17, 18 & 19 Lb.
• Factory Standard.: 20 Lb.
• Extra Power.........: None Available

This pak contains 1 each of 16, 17, 18 and 19 pound reduced power hammer springs described above, allowing adjustment of the firearm to individual requirements. Springs function in Walther models PP, PPK, PPKS and P-38, 7.65mm and 9mm(.380) calibers.

Service Pak Type I - Contains the following springs to return pistol to original factory condition: recoil spring, firing pin spring, hammer spring, extractor spring, magazine catch spring, trigger guard spring and locking bar spring.

Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring.

• Reduced Power....: (None Available)
• Factory Standard..: 15 Lb.
• Extra Power.........: 16, 17, & 18 Lb.

Magazine Springs are available in +5% extra power to assure proper feeding in pistols with weakened or broken springs. These springs function in both 7.65mm and 9mm calibers.

Hammer springs below are common to Walther pistol models PP, PPK, PPKS and P-38, 7.65mm and 9mm(.380) calibers.

• Reduced Power....: 13, 14, 16, 17, 18 & 19 Lb.
• Factory Standard..: 20 Lb.
• Extra Power.........: None Available

Service Pak Type I - Contains the following springs to return pistol to original factory condition: recoil spring, firing pin spring, hammer spring, extractor spring, magazine catch spring, trigger guard spring and hammer block spring.

Service Pak Type II - Contains all springs described in Type I pak above and a +5% extra power magazine spring.

Hammer springs below are common to Walther pistol models PP, PPK, PPKS and P-38, 7.65mm and 9mm(.380) calibers

Service Pak Type I - Contains the following springs to replace weakened or broken springs, returning the pistol to original factory condition: recoil spring, firing pin spring, hammer spring, extractor spring, magazine catch spring, hammer block spring and trigger guard spring.

Service Pak Type II - Contains all springs described in Type I pak above and a +5% extra power magazine spring.

Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring.

• Recuded Power....: 11 & 13 Lb.
• Factory Standard..: 15 Lb.
• Extra Power.........: 17 & 19 Lb.

Hammer Springs (Mainsprings)

• Reduced Power....: 16, 17, & 18 Lb.
• Factory Standard..: 20 Lb.
• Extra Power.........: (None Available)

Recoil Spring Paks contain 2 factory standard (6 Lb.) or extra power (8 Lb) recoil springs to restore factory functioning and specifications to pistol. Firing Pin Springs are not available for the P-38

Hammer springs below are common to Walther pistol models PP, PPK, PPKS and P-38, 7.65mm and 9mm(.380) calibers.

• Reduced Power....: 13, 14, 16, 17, 18, & 19 Lb.
• Factory Standard..: 20 Lb.
• Extra Power.........: (None Available)

Hammer springs are not available for the P-5 at this time.

Service Pak Type I - For the P-38 contains the following springs to replace weakened or broken springs, returning the pistol to original factory condition: 2 recoil springs, hammer spring, extractor spring, auto firing pin lock spring, retainer latch plunger spring and cartridge indicator spring. A firing pin spring is not available for the Walther P-38.

Service Pak Type II - For the P-38 contains all springs described in Type I pak above and a +5% extra power magazine spring.

Fits P-38 Models Only

Service Pak Type I - Contains the following springs to replace weakened or broken springs, returning the pistol to original factory condition: recoil spring, striker spring, magazine catch spring and sear take-down catch spring.

Service Pak Type II - Contains all springs described in Type I pak above and a +5% extra power magazine spring.

Recoil Spring restores original factory spring specifications and function to pistol. Pak also includes a firing pin spring.

Recoil Springs available in factory standard and +15% extra power ratings. Spring restore function to pistols with weakened or borken springs. Paks also include a firing pin spring.

Hammer Springs available in factory standard (14.5 Lbs) or extra power (16.5 Lbs.) ratings