Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring. Also for use in Browning BDA .45ACP

Notes:  For Original P220 Models with 4.4" Barrels.
           Not for use in P220C Compact models
           Not for use in P220 Match Elite and P220 Super Match Stainless (ST)

• Reduced Power...: 14, 15, 16, & 18 Lb.
• Factory Standard.: 20 Lb.
• Extra Power.........: 22 & 24 Lb.
  
  

P220 RECOIL SPRING NOTES:
    1. Current production has green painted recoil springs rated at 20 Lbs.
    2. Earlier models had a black recoil spring rated at 15 Lbs.
    3. Super .38 model has a 14 Lb. factory recoil spring.
    4. Browning BDA .45 has a 14 Lb. factory recoil spring.

For Use in:
  P-220 with serial numbers below 219166

Hammer Springs - Available in reduced for factory standard ratings.

• Reduced Power...: 18, 19, & 20 Lb.
• Factory Standard.: 22 Lb
• Extra Power.........: None Available

Hammer Spring Pak - This pak contains 1 each of 18, 19 and 20 pound reduced power hammer springs described above. For use in P220 with serial numbers below 219166.

   P-220s with Serial Number above 219166

Hammers Springs - Available in Reduced Power, Factory Standard, and Extra Power.

• Reduced Power...: 16, 17, 18, 19, 20, & 22 Lb
• Factory Standard.: 24 Lb.
• Extra Power.........: 26 & 28 Lb.

Hammer Spring Pak - This pak contains 1 each of 16, 17, 18 and 19 pound reduced power hammer springs above, allowing adjustment of the firearm to individual requirements.For use in P220 with serial numbers above 219166.

Plastic Hammer Spring Base- For Models P-220 thru P-229.

Recently Sig has started using a plastic hammer spring base/retainer with a short hammer spring.  This is being phased in across all models.  If your pistol has the plastic base/retainer for the hammer spring the following springs are for your pistol.

• Reduced Power...: 17, 18, & 19 Lb.
• Factory Standard.: 21 Lb
• Extra Power........: None Available

Hammer Spring Pak - Reduced Power - This pak contains 1 each of 17, 18 and 19 pound reduced power hammer springs above, allowing adjustment of the firearm to individual requirements. 
PLASTIC HAMMER SPRING BASE MODELS ONLY.

Magazine Springs are available in +5% and +10% extra power allowing a choice of springs for optimum magazine performance.

*Note: In newer P220's using the green recoil spring, the Wolff +10% magazine spring is factory standard and the +5% would be reduced power.
*Note: Wolff magazine springs will not fit new 8 round P220 magazines made by Mec-Gar .

Magazine springs are available in +5% and +10% extra power allowing a choice of springs for optimum magazine performance.

*Note: In newere P220's using the green recoil spring, the wolff +10% magazine spring is factory standard and the +5% would be reduced power
*Note: Wolff magazine springs will not fit new 8 round P220 magazines made by Mec-Gar.

Recoil Springs - Conventional Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring. Note: The P-229 in .357 Sig has a 17 pound factory recoil spring.

For Use in:
   P-225 & P-228- 9mm
   P-229- 9mm, .40 S&W

• Reduced Power...: 13, 14, & 15 Lb.
• Factory Standard.: 16 Lb (17 Lb. for P-229 - .357 Sig)
• Extra Power.........: 17, 19, & 21 Lb.

For Use in:   
   P-225, P-226, P-228, P-229
   P-220 with Serial Number below 219166

• Reduced Power...: 16, 17, 18, 19, 20, & 22 Lb.
• Factory Standard.: 24 Lb.
• Extra Power.........: 26 & 28 Lb.

Plastic Hammer Spring Base- For Models P-220 thru P-229.

Recently Sig has started using a plastic hammer spring base/retainer with a short hammer spring.  This is being phased in across all models.  If your pistol has the plastic base/retainer for the hammer spring the following springs are for your pistol.

• Reduced Power...: 17, 18, & 19 Lb.
• Factory Standard.: 21 Lb
• Extra Power........: None Available

Hammer Spring Pak - Reduced Power - This pak contains 1 each of 17, 18 and 19 pound reduced power hammer springs above, allowing adjustment of the firearm to individual requirements. 
PLASTIC HAMMER SPRING BASE MODELS ONLY.

Magazine springs are available in +5% extra power for the P-225
For Use in:
   P-225 - 8 round magazines

Magazine springs available in +5% and +10% extra power for the P-226, P-228 and P-229 allowing a choice of springs for optimum magazine performance. The stronger spring is especially recommended when using extra power recoil springs.

For Use in:
   P-226 - 15 round magazine
   P-228 - 13 round magazine
   P-229 - 12 round magazine
  

For Use in:
   All Sig 10 round magazines for P-226, P-228, P-229

Conventional Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated recoil spring pak includes an extra power firing pin spring.  Springs also for use in P220 full size models.

   Note: Not for use in P-220C Compact Model

• Factory Standard - 9mm......................: 15 Lb.
• Factory Standard - .40S&W & .357 Sig.: 20 Lb.
• Available Weights................................: 14, 15, 16, 18, 20, 22 & 24 Lb.

Conventional Recoil Calibration Pak for Sig P-226.

Stock No. 13178 - Contains 1 each of the above conventional recoil springs in 20, 22, & 24 pounds. Three extra power firing pin springs are also included.

Stock No. 13209 - Contains 1 each of the above conventional recoil springs in 15, 16, 18, & 20 pounds. Three extra power firing pin springs are also included.

Variable Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated variable recoil spring includes an extra power firing pin spring. Springs also for use in P-220 full size models.

Note: Not for use in P-220C Compact Models

• Factory Standard - 9mm....................: 15 Lb.
• Factory Standard - .40S&W, .357 Sig.: 20 Lb.
• Available Weights..............................: 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19 Lb.

Variable Recoil Calibration Paks for Sig P-226

Stock No. 13179 - Contains 1 each of the above reduced power variable recoil springs in 10, 11, 12, 13, & 14 pounds. Three extra power firing pin springs are also included.

Stock No. 13193 - Contains 1 each of the above extra power variable recoil springs in 16, 17, 18, & 19 pounds. Three extra power firing pin springs are also included

For Use in:
   P-225, P-226, P-228 & P-229
   P-220 with serial number above 219166

• Reduced Power...: 16, 17, 18, 19, 20, & 22 Lb.
• Factory Standard.: 24 Lb.
• Extra Power.........: 26 & 28 Lb.

Recently Sig has started using a plastic hammer spring base/retainer with a short hammer spring.  This is being phased in across all models.  If your pistol has the plastic base/retainer for the hammer spring the following springs are for your pistol.

• Reduced Power...: 17, 18, & 19 Lb.
• Factory Standard.: 21 Lb
• Extra Power........: None Available

Magazine springs available in +5% and +10% extra power for the P-226, P-228 and P-229 allowing a choice of springs for optimum magazine performance. The stronger spring is especially recommended when using extra power recoil springs.

For Use in:
   P-226 - 15 round magazine
   P-228 - 13 round magazine
   P-229 - 12 round magazine

For Use in:
   All Sig 10 round magazines for P-226, P-228, P-229

Recoil Springs are available with load-rated specifications to tailor the recoil function to individual needs. Each load-rated spring pak includes an extra power firing pin spring.

• Reduced Power...: 13 Lb.
• Factory Standard.: 15 Lb.
• Extra Power.........: 16 & 18 Lb.

For Use in:
   Sig P-230 with serial number below: 
         Blue Models: S165076
         Stainless Models: S053921

• Reduced Power...: 16, 17, & 18 Lb.
• Factory Standard.: 20 Lb. (Reference Only)
• Extra Power.........: None Available

Hammer Springs

• Reduced Power...: 12, 14, & 16 Lb.
• Factory Standard.: 18 Lb.
• Extra Power.........: None Available