This pak provides 10 general purpose coil-type hammer springs made from heavy wires. All springs are designed for use on 1/4" firing pins or guides. There are 5 different designs with 2 springs of each supplied. All springs have extra coils to permit fitting.

Contained in this pak are 50 general purpose coil-type firing pin retraction springs designed for use in shotguns where firing pin retraction is effected by use of coil-type springs. There are 10 different spring designs with 5 of each design provided. All springs have extra coils to permit fitting to your application.

Pak contains 10 general purpose coil-type automatic ejector springs for both over & under and side-by-side shotguns. Springs are designed to replace weakened or broken springs and are extremely stiff so that ejectors actuate in a snappy manner after fitting. All springs are 4 inches long. There are 5 spring designs - 2 springs of each design, offering sufficient variation to accommodate most repairs. Fitting is required.

10 general purpose coil-type hammer springs for use in over & under shotguns are provided in this pak. Springs are designed to replace broken or weakened original hammer springs in foreign make over & under shotguns imparting faster lock-time with positive ignition. All springs are designed to function on 2.85mm (0.112") and larger guide diameters. There are 5 spring designs with 2 of each supplied. All springs have extra coils to permit fitting.

This pak offers 30 "stiff" general purpose coil springs designed for use as extractor and ejector springs in rifles and shotguns. There are 6 spring designs with 5 springs of each design supplied. This selection offers sufficient variations for most repairs. Extra coils are provided on all springs. Fitting is required.